Stacks Image 69

The Cetacean Research Technology CR1

The CRT CR1 hydrophone is an excellent multi-purpose hydrophone.
This non-preamplified hydrophone is ideal for the detection and recording of very loud signals, such as those from pile driving, air guns, or underwater demolition operations.
Stacks Image 70
It can be used with an external preamplifier for recording and listening to the quieter sounds of cetaceans and other underwater sources. Terrestrial applications for the CR1 include vibration detection and using it as a geophone. The hydrophone comes with an extra tough polyurethane-jacketed coaxial cable. The cables can be terminated with either BNC or mono phone plug connectors.

All CR1 hydrophones are individually spot calibrated at the factory.
Specifications
Linear Frequency Range (±3dB) [kHz]: 0.0002 to 50
Useable Frequency Range (+3/-20dB) [kHz]: 0.00002 to 110
(see note †)
Sensitivity [dB, re 1V/µPa]: -198
Preamplifier Gain [dB]: N/A
SPL Equiv. Self Noise at 1kHz [dB, re 1µPa]: TBD
Power Requirement [Vdc]: N/A
RMS Overload Acoustic Pressure [dB, re 1µPa]: N/A
Maximum Operating Depth [m]: 100
Operating Temperature Range [ºC]: -25 to 60
(see note ††)
Capacitance [nF]: 10
Dimensions [mm]: 73 L x 32 dia
Coaxial Cable Length: 15 meters, Cable terminated with male BNC or mono phone plug connector (longer cable optional)
Directionality: omnidirectional below 10kHz
Battery / Connector box: power not required
Stacks Image 71
Stacks Image 72
note †
Requires a preamplifier with 100MOhm input impedance, such as the Reson VP1000  or Reson VP2000  preamplifiers (on the left).

If a preamplifier with 1MOhm input impedance is used, then the low frequency -3dB point will be at 16Hz instead of 0.2Hz and the -20dB point will be at 2Hz instead of 0.02Hz.
note ††
CR1 hydrophones are individually spot calibrated at the factory; calibration guaranteed between -5ºC and 30ºC.
Options
  • extra length ruggedized cable
  • custom orders not listed above
  • hydrophone may be used with either the optional Reson VP1000 or Reson VP2000 preamplifiers.